Restoration
This fine blasting technique requires not only craftsmanship, but also machines that can fine-tune key parameters to achieve the most refined, natural-looking results (without risk of irreparable surface damage). Restoration blasting is something Gritco has now had over 34 years of experience in.
The blast chain
Very fine blast media with low blasting pressure should be used for blasting delicate substrates. A constantly dosed amount is also very important for the best uniform result. Gritco has developed special blast pots for this purpose.
The choice of abrasive depends on the material type of the object and the desired treatment. A sharp but extremely fine abrasive (ranging from 0.05 to 0.3 mm) is often chosen to achieve the most refined surface results.
The size of the restoration project determines which compressor is most suitable. As extremely fine abrasives are used, dry compressed air is essential to prevent blockages in the blast pot.
Our blast pots for this
The right blast chain
Achieving the results you want requires the right composition of the blast chain to suit your situation. We can help with that.
In a (free) consultation, we determine together the alignment of the different links to achieve the best results at lower costs.
