Blasting robots
Gritco optimizes the extreme high performance of robotized blasting (using very large and possibly multiple nozzles) even further with a specially designed blast pot series providing continuous blasting without costly refill – stop/start - intervals.
Gritco’s high quality blast pots
An uninterrupted, stable, large volume robotized work flow – also using multiple nozzles - is made possible with Gritco’s continuous blast pot series.
The right choice of abrasives
The type of material and treatment of an object define the abrasive’s sort and size. In robotized blasting recyclable abrasives are used for constant reuse. The degree of contamination and required result (e.g. surface roughness) determine the abrasive grain size, which should be as small as possible to optimize blasting speed and cover rate.
Dryers
To ensure a blockage free, constant abrasive dosage and better surface quality (for further processing like paint spraying), blasting with dry compressed air is essential. This is achieved with an compressed air dryer as advised by the supplier of the compressor.
The right compressor
"More power means more work" is especially true for the last part of the blasting chain: the compressor. More air means faster progress simply because of the possibility to use larger nozzles creating larger blasting patterns. Therefore compressor capacities can vary from 10 to 20 m³/min. More info about the size of compressor here.
The blasting chain
