Air line filters

Polluted air can be the cause of major health issues and, at the very least, can adversely affect operator comfort and productivity. Our filters improve the quality of the air and exceed industry filtration standards so you can be assured that you won’t suffer the consequences of breathing contaminated air. In combination with a suitable compressed air cooler/dryer, the different filtering stages provide quality air according to EN 12021 

Radex air line filter

This filter is fitted with a large capacity, 6-stage filter cartridge that removes moisture, odor and particulates to 0.5 micron from the compressed air stream, providing clean, breathable air. The Radex features a unique twist-and-lock wall and floor mounting system.
An optional auto drain valve is available to fit to your filter that continually removes moisture from the filter housing, increasing the lifespan of the filter cartridge.
The outlet pressure regulator provides the ability to adjust the correct air pressure for two users.

Download leaflet

Filter case

Three separated filters are housed in a strong plastic case which can be floor or wall mounted. The correct air pressure for two or four users can be set with the built-in pressure regulator.
Emulsions and solid particles (up to 5 micron) are intercepted by the first filter. Liquids and solids (up to 0.1 micron) are caught by the second (coalescing) filter. A remaining oil content of 0.01 mg/m3 makes the air passing these two filters practically 99,99% oil free.
The standard automatic drains on both filters remove moisture, expanding the lifespan of the filter cartridges. Two pressure differential indicators show when the two cartridges need to be replaced.
The third (activated carbon) filter remove all odors and vapors that are still left after the first two filtering stages through the absorbing principle. The result is a remaining oil content as little as 0,008 mg/m3.